3d-Cam: The Cutting Edge in Rapid Prototyping, Rapid Tooling, Stereolithography 3d-Cam: The Cutting Edge in Rapid Prototyping, Rapid Tooling, Stereolithography


Tech Support: Materials

SLA Resins
 

HRD 78

PRODUCT HIGHLIGHTS:

  • Non-Mercury Based Catalyst System

  • High impact rigid material

  • Odorless, clean white color

  • One to two hour demold time

  • Excellent for vacuum or pressure casting

  • Low viscosity

  • Exhibits exceptional high heat distortion temperature

PRODUCT DESCRIPTION:

HRD 78 produces a high impact, rigid 78 Shore D material that is commonly used to make computer housings, models of all kinds, artwork, and can also be used for electronic component encapsulation. HRD 78 is an excellent hand-castable product that produces parts with heat deflection temperatures up to 2200F(1040C).

PHYSICAL PROPERTIES

Hardness,  ASTM D-2240 78±2
Specific Gravity (gm/cc), ASTM D-792 cured 1.15
Displacement (cu.in./lb) 26.4
Color/Appearance Creamy white
Tensile Strength (psi) ASTM D-638 7,000
Tensile Modulus, (psi) ASTM D-638 2.4X105
Elongation(%) ASTM D-638 12
Flexural Strength (psi) ASTM D-790 10,500
Flexural Modulus ASTM D-790 2.7X105
Linear Shrinkage (in./in.) (12"X1/2"X1/2" )  0.004
Izod Impact (ft.lbs./in.) ASTM D-256 0.7
Heat Deflection Temperature ASTM D-648

@66 psi

@264 psi 

  

220o± 50F(104o± 30C)

200o± 50F(93o± 30C)

HANDLING PROPERTIES

Mixed Viscosity  @ 770F(250C) (cps) 250
Work Time @ 770F(250C), 100 gr.mass 4.5-5 minutes
Demold Time 770F(250C) 1-2 hours
Cure Schedule For maximum physical properties the material should be post cured
this is text meant just to take up lots of space at the bottom of the page, so that if there is only a table or something in the content part of this page, the content still takes up the majority of the screen. if there is not any text here, then sometimes there will be just a table here, and the left navigation bar to the left will be kinda wide...
Website by Celia La Designs