3d-Cam: The Cutting Edge in Rapid Prototyping, Rapid Tooling, Stereolithography 3d-Cam: The Cutting Edge in Rapid Prototyping, Rapid Tooling, Stereolithography


Tech Support: Materials

SLA Resins
 

FLEX 80

PRODUCT HIGHLIGHTS:

  • Rapid demolds

  • Ideal for part production

  • Does not contain MOCA, MDA, or TDI

PRODUCT DESCRIPTION:

Flex 80 is a production oriented fast gel and fast de-mold material. It features a working time which allows time to mix, vacuum de-gas, and pour air-free parts. Flex 80 can be demolded in as little as one hour depending on part size and configuration.

TYPICAL PRODUCT USES

  • Shock absorbent bumpers and pads

  • Potting and encapsulation

  • Tires for models of all kinds

  • Small molds

  • Many types of urethane parts

  • Cable connector sealer

PHYSICAL PROPERTIES

Hardness 80±5
Specific Gravity (gm/cc) cured 1.08
Displacement (cu.in./lb) 25.7
Color Opaque/white
Tensile Strength (psi) ASTM D-412 1900
Elongation(%) ASTM D-412 377
Tear Strength (pli) ASTM D-624 131
Shrinkage (in./in.) ASTM D-2566 0.0051

HANDLING PROPERTIES

Specific Gravity (gm/cc) Part A 1.11
Viscosity, (cps) @ 750F(240C) Part A 350
Initial Mixed Viscosity 1600
Work Life@ 750F(240C) 5-6 minutes
Gel Time (150 gm mass) 7-8 minutes
Demold Time@ 750F(240C)1/8" thick section 1-2 hours
Cure Schedule Full cure in 3 days or post cure at 1500F(660C) for 4 hours
this is text meant just to take up lots of space at the bottom of the page, so that if there is only a table or something in the content part of this page, the content still takes up the majority of the screen. if there is not any text here, then sometimes there will be just a table here, and the left navigation bar to the left will be kinda wide...
Website by Celia La Designs