3d-Cam: The Cutting Edge in Rapid Prototyping, Rapid Tooling, Stereolithography 3d-Cam: The Cutting Edge in Rapid Prototyping, Rapid Tooling, Stereolithography


Tech Support: Materials

SLA Resins
 

FLEX 60

PRODUCT HIGHLIGHTS:

  • Rapid demolds

  • Ideal for part production

  • Does not contain MOCA, MDA, or TDI

PRODUCT DESCRIPTION:

Flex 60 is a production oriented fast gel and fast de-mold material. It features a work life which allows sufficient time to vacuum de-gas, and pour air-free parts. Flex 60 can be demolded in as little as one hour depending on part size and configuration.

TYPICAL PRODUCT USES

  • Shock absorbent bumpers and pads

  • Potting and encapsulation

  • Tires for models of all kinds

  • Small molds

  • Many types of urethane parts

  • Cable connector sealer

PHYSICAL PROPERTIES

Hardness 60±2
Displacement (cu.in./lb) 26.2
Specific Gravity (gm/cc) cured 1.06
Color Cream, Semi-opaque
Tensile Strength (psi) ASTM D-412 685
Tear Strength (pli) ASTM D-624 57
Elongation(%) ASTM D-412 300
Modulus of Elasticity (psi) ASTM D-412 @100% Strain

@200% Strain

@300% Strain

 300

312

623
Shrinkage (in./in.) ASTM D-2566 0.0031

HANDLING PROPERTIES

Specific Gravity (gm/cc) Part A 1.10
Viscosity, (cps) @ 770F(250C) 350
Initial Mixed Viscosity 850
Work Life@ 770F(250C) (100gm.mass) 6-7 minutes
Gel Time (100 gm.mass) 8-9 minutes
Demold Time 1-2 hours
Cure Schedule Full cure in 3 to 5 days or post cure at 1500F(660C) for 4 hours
this is text meant just to take up lots of space at the bottom of the page, so that if there is only a table or something in the content part of this page, the content still takes up the majority of the screen. if there is not any text here, then sometimes there will be just a table here, and the left navigation bar to the left will be kinda wide...
Website by Celia La Designs