 |
 |
Tech Support: Materials
SLA Resins
- SL5240
- SL7520
- Somos 9120 Epoxy Photopolymer
- WaterClear 10120
- WaterShed 11120
- Somos Raven 7620
SLS Materials
- Durform PA and GF
- CastForm PS
- Accura LaserForm ST-200
- LaserForm ST-100
Short Run:Epoxies
- ET50
- EP
Short Run:Polyurethanes
- FLEX 40
- FLEX 50
- FLEX 60
- FLEX 70
- FLEX 80
- FLEX 85
- FLEX 90
- RD 60
- RD 80 FR
- RD 85 FR
- RFD 75
- SRD 40
- SRD 50
- SRD 65
- HRD 78
- F-51R
- SD 9460
- SDC-765
- FC-565
- RC-783
Long Run Materials
- Nylon 66-6
- Polystyrene
- Polycarbonate
- ABS Molded
- Polypropylene Molded
- Acrylic, General Purpose, Molded
- Santoprene (TPV) 101-55
- High Flow PC+ABS
- VYRAM (TPV) 101-55
3D-Cam, Inc.
9801 Variel Ave.
Chatsworth, CA 91311
tele: 818.773.8777
fax: 818.773.9582
ET50PRODUCT HIGHLIGHTS:
PRODUCT APPLICATIONS:
PRODUCT DESCRIPTION:ET50 is an aluminum powder filled epoxy casting resin system that provides service temperatures to 350° F (177°C). ET50 is most commonly used for the construction of molds that require good heat conductivity, outstanding durability, and that provide production run capability. The majority of applications for ET are used in conjunction with other materials in developing composite mold structures. The composites approach to mold construction uses ET50 as a binder for SC-124 Aluminum Granules. This mixture is cast behind a high temperature surface coat, ET10 or ET15. This combination provides several benefits. The ET10 or ET15 surface coat provides exceptional durability, and the aluminum granule addition to the ET50 provides vastly increased heat conductivity and reduced shrinkage. In addition this method will decrease coast. Generally, the SC-124 Aluminum Granule is added at the rate of 60 parts by weight to 100 parts by mixed resin and hardener. Larger amounts of aluminum granules are added when vacuum form molds, casting molds, foam molds, and other low pressure compression type molds. PHYSICAL PROPERTIES
HANDLING PROPERTIES
|