3d-Cam: The Cutting Edge in Rapid Prototyping, Rapid Tooling, Stereolithography 3d-Cam: The Cutting Edge in Rapid Prototyping, Rapid Tooling, Stereolithography


Tech Support: Materials

SLA Resins
 

SANTOPRENE (TPV) 101-55

PRODUCT DESCRIPTION:

A Soft, black, versatile thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material combines good physical properties and chemical resistance for use in a wide range of applications. Santoprene rubber is a shear-dependent material that can be processed on conventional thermoplastic equipment for injection molding or extrusion. It is polyolefin based and completely recyclable.

 PROPERTIES

Hardness Nominal value unit Test Method
Durometer Hardness (A scale, 0.120 in) 55 ASTM D2240
Density - specific gravity 0.97 sp gr 23/230C ASTM D792
Tensile stress @ 100% Across flow: 300 psi ASTM D412
Tensile Str @ Break Elast (730F) Across flow: 750 psi ASTM D412
Elongation @ Break Elast Across flow: 390.0 % ASTM D412
Tear Strength   ASTM D624
 (730F) Across Flow: 110 lbf/in  
(2120F) Across Flow: 40 lbf/in  
Compression set   ASTM D395
(730F, 168 hr) 20%  
(2120F, 168 hr) 27%  
Max. Continuous Use tmp 2750F ASTM D 794
Brittle Temperature -760F ASTM D746
Dielectric Strength(0.125 in) 500V/mil ASTM D149
Dielectric constant 2.30 ASTM D150
Flame Rating - UL HB UL94
Change in Tensile Strength in air (3020F, 168 hr) -3% ASTM D573
Change in Ultimate Elongation in air (3020F, 168 hr) 0% ASTM D573
  this is text meant just to take up lots of space at the bottom of the page, so that if there is only a table or something in the content part of this page, the content still takes up the majority of the screen. if there is not any text here, then sometimes there will be just a table here, and the left navigation bar to the left will be kinda wide...
Website by Celia La Designs